Wednesday, March 31, 2010

New Megane Coupe Cabriolet With Elegant


    New Mégane Coupé-Cabriolet completes the renewal style of the New Mégane family which is built on the strengths that forged the success of its predecessor. Its new appearance is supported by the large folding glass roof, high-gloss finish, black glass roof contrasts with the satin-effect chrome windscreen frame exterior, and the dark red taillights featuring a linear lighting pattern and LED brake lights to provide a distinctive rear lighting character.
    With it’s new style, New Mégane Coupé-Cabriolet goes further by offering customers with unruffled open-top motoring supported by the forward position of the windscreen and a fixed glass, outstanding handling performance with a stiffer chassis and a new electric power steering system, and a broad choice of efficient and eco-friendly powertrains including the all-new automatic EDC (Efficient Dual Clutch) transmission.Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

New Megane Coupe Cabriolet With Elegant


    New Mégane Coupé-Cabriolet completes the renewal style of the New Mégane family which is built on the strengths that forged the success of its predecessor. Its new appearance is supported by the large folding glass roof, high-gloss finish, black glass roof contrasts with the satin-effect chrome windscreen frame exterior, and the dark red taillights featuring a linear lighting pattern and LED brake lights to provide a distinctive rear lighting character.
    With it’s new style, New Mégane Coupé-Cabriolet goes further by offering customers with unruffled open-top motoring supported by the forward position of the windscreen and a fixed glass, outstanding handling performance with a stiffer chassis and a new electric power steering system, and a broad choice of efficient and eco-friendly powertrains including the all-new automatic EDC (Efficient Dual Clutch) transmission.Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

2010 Ford Ranger to Get Advanced Safety Options

    Photobucket


    PhotobucketFord is adding a stability and roll over protection system to their Ford Ranger pickup. This system greatly reduces the chance of a roll over. In addition, the 2010 Ranger will also get side-impact airbags that offer better protection in a side impact collision.
    Visually there are no changes to the exterior of the Ranger. Ford expects that these changes will win over buyers from competitive pickups that do not offer these safety enhancements.
    Ford sold over 65,000 units of the Ranger last year.

    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

2010 JE DESIGN Seat Leon FR





    JE DESIGN has launched their Seat Leon FR program which brings both performance and styling upgrades. For the petrol version, the TFSI engine of the JE DESIGN Seat Leon FR has been tuned to output 270 hp (199 kW) 355 Nm of torque. The extra juice of the 2010 JE DESIGN Seat Leon FR comes from a re-programmed ECU. The extra horses enable the car to get from 0 to 100 km/h in 6.2 seconds. The price for this upgrade is 1499 Euros.





    The TDI diesel version of the 2010 JE DESIGN Seat Leon FR develops 204 hp (150 kW) and 380 Nm of torque thanks to a re-mapped ECU. The 0 to 100 km/h sprint time drops to 7.6 seconds. The price for the diesel JE DESIGN Seat Leon FR upgrade is 1339 Euros.

    The JE DESIGN Seat Leon FR also comes with a new aerodynamics package which includes a new front spoiler with a double lip, side skirts, a rear skirt attachment and a rear diffuser. The JE DESIGN Seat Leon FR features wing-doors, a new exhaust muffler system and 19inch wheels.




    The JE DESIGN Seat Leon FR program also includes a new suspension which lowers the ride height by 35 millimeters.

    JE DESIGN Press Release:

    At Seat, FR stands for Formula Racing. But that was not exciting enough for the JE DESIGN engineers. They turned the new Seat Leon FR into a real sports car which has significantly gained power and also shows it.



    The Seat two-liter petrol engine produces 211 hp (155 kW) in the serial model. Due to an optimisation of the control unit, JE DESIGN increases the performance of the TFSI-engine by a good quarter to 270 hp (199 kW). The maximum torque leaps from 280 to 355 Newton metres.



    Instead of 7.1 seconds, the JE DESIGN-Leon reaches the 100 kph barrier in already 6.2 seconds. JE DESIGN offers the performance enhancement for 1499 Euros including VAT, assembly and a one-year warranty.

    Also the Diesel engine becomes brawnier after JE DESIGN engineers put the finishing touches on their work. The additional electronics Can-Tronic boosts the two-litre TDI from 170 hp (125 kW) to 204 hp (150 kW) and the maximum torque from 350 to 380 Newton metres. Therefore the sprint from 0 to 100 kph is reduced from 8.2 to 7.6 seconds. The price is 1339 Euros and also includes VAT, assembly and warranty.

    The Leon FR by JE DESIGN proudly presents this newly acquired power with bold headlight blends (89 Euros), LED daytime running lights (299 Euros) and its aerodynamics pack. The front spoiler with the double lip (279 Euros) draws the vehicle to the road. The side skirts (299 Euros) calm down the air flow which derives from the new rear skirt attachment (299 Euros) and the centre diffuser attachment (99 Euros) at the rear. There, the end muffler with its mighty four-pipe system (899 Euros) unmistakably confirms that this is no serial Seat.

    By lowering the vehicle, the car receives a sportier look and a better handling at the same time. Owing to the lowering springs (159 Euros), the Seat is 35 millimetres closer to the road. With the coilover suspension (979 Euros), an individual lowering from 15 to 40 millimetres can be achieved. Therefore, the new 19-inch wheels look especially impressive. The elegant and dynamic design of the Multispoke wheels glows in black and has a polished rim bead. Sport wheels measuring 225/35R 19 ensure a safe contact to the road (entire wheel set for 2930 Euros).

    The most significant difference between the JE DESIGN Leon and its serial counterpart shows as soon as the driver opens the doors. The wing door hinges (1499 Euros) first open the doors outwards before they safely glide upwards.

    And as if the refinement of the engine and the exterior were not impressive enough, JE DESIGN additionally enhances the interior. Seats, door linings and the centre armrest are all wrapped in noble leather (1599 Euros). Thereby, the colour combination between leather and stitches can be chosen without any additional charges. A two-stage seat heating (379 Euros) is offered as well as an adjustable lordosis support (319 Euros). But the highlight of the interior refinement is not visible: the driver and the passengers can indulge in the luxury of the massage system in the seats which offers twelve programmes (429 Euros). Moreover, the refiner offers to embroider a logo into the back rests (79 Euros) according to the wishes of the customer.

    Moreover, the refining experts from Leingarten also offer noble leather for the steering wheel (399 Euros), the gear shift skirt and the hand brake cuff (together for 179 Euros).

    With the Leon FR, JE DESIGN once again confirms its competence in refining Seat automobiles. With the performance enhancement, the entire aerodynamics pack and a keen eye for details, the engineers developed a dynamic and overall harmonious automobile.
    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

New York Auto Show: 2011 Mercedes SLS AMG GT3


    Mercedes-Benz introduced a new race car during the New York Auto Show earlier today.  The Mercedes-Benz SLS AMG GT3 will be used in competition beginning in 2011.

    The 2011 Mercedes SLS AMG GT3 is powered by the AMG 6.3-litre V8 front-mid engine with dry sump lubrication coupled with a sequential six-speed racing transmission steering wheel shift paddles. The 2011 Mercedes SLS AMG GT3 also comes with an multi-disc locking differential integrated in the
    transmission. The engine and the transmission of the 2011 Mercedes SLS AMG GT3 are connected via a torque tube within which a carbon-fiber shaft rotates at the engine speed, as in the roadgoing version.

    The SLS AMG GT3 features a new new front apron with a splitter, the bonnet with central cooling air vent, wider front and rear wings, sideskirts with cooling ducts for the rear brakes, a rear diffuser and the adjustable rear aerofoil.

    That light-weight body is made entirely of carbon fiber, with impressive new aerodynamics including a massive front splitter, rear diffuser and enormous rear spoiler. Compared to the road car, the GT3’s bodywork is two inches wider, enough to accommodate some massive center locking 18×12-inch front and 18×13-inch rear wheels with racing slicks. Inside those wheels is a special composite AMG race braking system with six-piston front calipers and four-piston rear calipers.

    The 2011 Mercedes SLS AMG GT3 price was not announced yet, but Daimler mentioned that sales will start in autmun 2010.


    Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3 Mercedes-SLS-AMG-GT3



    Press Release

    Automobile fascination paired with spectacular race car design - that is the new Mercedes-Benz SLS AMG GT3. The racing version of the SLS AMG has been conceived as a customer sport vehicle for participation in race series based on FIA GT3 regulations. Meticulous lightweight construction and optimized chassis, brakes and aerodynamics deliver uncompromising dynamics. The extra special SLS AMG will make its race track debut in 2011.

    The clean design and breathtaking form of the SLS AMG have been effectively accentuated by targeted modifications to the bodyshell. The new components, made largely from lightweight carbon fiber offer a clear indication of extraordinary race track performance and extensive aerodynamic development work.

    From the front, the GT3 race car boasts a new front skirt with enlarged air intakes. The wide opening beneath the characteristic radiator grille bearing the large Mercedes star and the wing-shaped horizontal fins supplies air to the engine oil cooler and brake discs. The same function is served by the two intakes below the vertical bi-xenon headlamps. Downforce on the front axle is provided courtesy of four externally mounted side flics, as well as a carbon front splitter; it runs directly into the smooth underbody panel, which connects to the rear diffuser.

    The hood features a central opening for the extraction of heat from the engine, while side openings in the front fenders facilitate air flow through the wheel arches. Weight optimization measures include the application of extremely lightweight polycarbonate for the side and rear windows and, if desired, for the front windshield as well.

    The fenders have been widened front and rear to accommodate the large racing tires. With a breadth of 78.3 inches, the GT3 bodyshell is a good 2 inches wider than the series production SLS AMG. The new sills feature openings for cooling the rear brakes, with the smooth underbody visible along the underside of the sills. The B-pillar houses the standardized fuel tank adapter for the rapid refueling system. The 31.7 gallon fuel tank is located centrally behind the driver.

    Wide rear carbon spoiler

    The rear view of the SLS AMG GT3 is dominated by its imposing width. Above the rear hatch sits a wide carbon fiber spoiler; it is extensively adjustable and facilitates perfect setup to suit individual race track characteristics. The new rear skirt accommodates two openings for extracting air from the rear wheel arches. A further visual highlight is the rear carbon fiber diffuser; it rises smoothly from the rear axle area as a continuation of the smooth underbody, its form adding to the downforce. The overall aerodynamic concept of the SLS AMG GT3 was analyzed and defined through extensive wind tunnel and race track testing.

    The black exhaust end pipes deliver a fascinating and, at the same time, characteristic AMG eight-cylinder sound. The regulation rain lamp is integrated into the rear hatch - it must be switched on by the driver in poor weather conditions.

    Close to series production AMG 6.3 liter V8 engine

    As defined in the FIA GT3 regulations, the AMG 6.3 liter V8 engine is virtually identical to that of the series production vehicle. Thanks to its low weight, the acceleration figures for the GT3 - 3.7 seconds for the sprint from 0 to 60 mph - are considerably below the already excellent figures for the series production vehicle. Depending on gear ratio, the top speed is more than 186 mph.

    The AMG 6.3 liter V8 engine uses dry sump lubrication in the racing vehicle, too. The application of a suction and pressure pump, as well as an external oil tank means that the conventional oil sump can be omitted. This technology ensures reliable lubrication of the engine under high lateral acceleration, of the kind usually experienced on the race track.

    Dry sump lubrication also facilitates a low mounting position for the V8 power unit - one of the key technological highlights of the SLS AMG. The solution - installing the eight-cylinder as low as possible and as a front mid engine behind the front axle, combined with a transaxle transmission layout - results in excellent weight distribution.

    Six-speed racing transmission with sequential shift

    In contrast to the series production vehicle, the SLS AMG GT3 is equipped with a six-speed racing transmission with sequential shift. Thanks to its compact construction, the race-tested transmission offers considerable packaging benefits - ultimately, the GT3 version has less ground clearance than the series production vehicle. The driver shifts gear using two shift paddles on the steering wheel. The transmission is mounted directly on the rear axle and connected to the V8 engine via a torque tube, which has a very high degree of flexural and torsional stiffness. This delivers considerable benefits when it comes to dynamics, as this sophisticated solution enables the entire driveline to be laid out with significantly less play. Alongside the traction control, a multi-plate locking differential integrated into the transmission delivers outstanding acceleration characteristics. Inside the torque tube, a drive shaft rotates at engine speed. As in the series production model, and in the Mercedes-Benz C-Class DTM touring car, the shaft is made from carbon fiber.

    With its long wheelbase, low center of gravity and wide track, the SLS AMG vehicle concept was predestined for the race track - its strengths include precise turn-in characteristics, first-class agility, low inertia under sudden changes of direction and a high cornering limit.

    It required only minimal modification for perfect race track performance. The lightweight aluminum chassis with double wishbone suspension at all four corners has modified kinematics to take into account the lower vehicle height. The array of adjustability options facilitates optimal modification to suit individual race track characteristics and varying weather conditions. As well as the ability to vary the spring and damper setup, there is also the freedom to adjust track and camber, vehicle height and the stabilizers on the front and rear axles.

    Like the series production SLS AMG, the GT3 version is also equipped with rack and pinion steering with speed-dependent power assistance. The more direct input ratio facilitates even greater handling agility on the race track.

    AMG race braking system using composite technology

    Shortest stopping distances, highest stability and optimal control are guaranteed by the AMG race braking system. All four corners feature brake discs in motorsport-tested composite technology. Gray cast iron axial and radial floating discs are fixed to an aluminum hat via stainless steel composite elements. This sophisticated technology enables perfect heat dissipation and thus reliable stability. The SLS AMG GT3 is also equipped with precisely calculated cooling channels - openings in the front skirt and ahead of the rear wheels direct cool airflow over the brake discs. All four brake discs are ventilated, slotted and drilled. Six-pot fixed calipers on the front axle and four-pot fixed calipers at the rear, finished in anthracite with the AMG logo in white, provide plenty of brake pad surface. An anti-lock brake system with special race track settings is fitted as standard. Due to space restrictions, the AMG high-performance ceramic composite brake system, available as an option on the series production vehicle, is not compatible with the 18-inch wheels prescribed by FIA regulations.

    The AMG center-locking alloy wheels - 12x18 inches front and 13x18 inches rear - are fitted with racing tires in formats 11.3 x 26.9 inches (front) and 12.4 x 27.9 inches (rear). Depending on the application, the tires are available as profile-free slicks, intermediates or wet weather tires. The classic multi-spoke design aids ventilation of the braking system. Fast pit stops and wheels changes are ensured by the pneumatic lift system integrated into the underbody. Four pneumatic rams raise the GT3 race car by around 7.5 inches, enabling the pit crew to change the racing tires in double quick time.

    Interior with racing bucket seat and race steering wheel

    On opening the gullwing doors, the SLS AMG GT3 displays a functional interior with a distinctly race car feel. The driver sits in a racing bucket seat fitted with a six-point harness and the HANS system (Head and Neck Support) that fixes the helmet in place in the event of an accident, thus minimizing the risk of injury. Additional safety comes courtesy of the steel roll cage, which also serves to further stiffen the aluminum spaceframe.

    A steering wheel with a diameter of 13 inches facilitates perfect vehicle control. Because it is open at the top, the driver always has a perfect view of the central display, which provides all relevant information such as road speed, engine speed, operating temperatures, lap times and gear selection. The steering wheel is fitted with a quick-release mechanism that makes entering and exiting the vehicle considerably easier. The switches on the steering wheel hub enable the driver to activate additional functions such as the pit radio, headlamp flasher and the drink supply. Further operating elements are mounted on the center console and include the start/stop function for the AMG V8 engine, the traction control, reverse gear and - just in case - the integrated fire extinguisher. The control for adjusting brake balance is located on the torque tube tunnel.

    The close relationship between the GT3 and its series production sibling is demonstrated by the instrument cluster, with its powerfully taut wing profile providing visual breadth. Integrated into the dash are the highly distinctive air vents galvanized in "Silver Shadow" and with adjustable cross-shaped nozzles - their form evocative of a jet engine.

    Deliveries of customer vehicles to start early 2011

    The new SLS AMG GT3 has been developed in accordance with FIA GT3 regulations and is entitled to participate in all GT3 race series - including the popular 24-hour races in Spa-Francorchamps, Belgium, and on the Nürburgring in Germany. Interested customers can order the vehicle starting in autumn 2010, with delivery scheduled prior to the start of the 2011 racing season. Homologation will be completed in March 2011.

    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

Type of Audi Cars

Lotus Exige S 240 with speed of 241 km / h



     
    In the case of new Exigea S 240 is not a completely new model, but on his restilizovanoj version, model year, 2010th

    Other changes to the exterior is short and covers primarily the front part of the precise (larger central air hole and the front spoiler) and a new, larger rear wing.

    The facility cares 1.8 liter Toyota 2ZZ-GE engine compressor, which develops 179kW/240KS at 8000 rpm. and 230 Nm at 5500 rpm., which is enough to accelerate from 0 to 60 miles per hour (96 km / h) of 4.1 seconds and top speed of 241 km / h


    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

2010 Venom GT Hennessey Supercar Concept


    Hennessey Performance Engineering today announced that it is introducing the company's first concept car - The Venom GT. Penned by British auto designer, Steve Everitt, the Venom GT would incorporate Hennessey's potent Venom 1000 Twin Turbo Viper V10 powerplant into a light weight mid-engine chassis weighing "under 2,700 lbs". Power would be run through a 6-speed transmission or optional sequential gearbox. With a power to weight ratio of just 2.7 lbs per bhp Hennessey estimates that the Venom GT could attain 0 to 100 km/h times in less than 2.5 sec. and a 0-300 km/h time of around 14 seconds.
    Venom GT Hennessey Supercar
    The Hennessey Venom GT weights less than 2,400 lbs (1,071 Kg) and to stop the Venom GT, Hennessey added Brembo brakes with 6-piston calipers up front and 4-piston calipers in rear clamping down on 15-inch carbon ceramic rotors. Hennessey plans on building 10 units of the Venom GT annually and four have already been sold at around $600,000 a pop. That means there are only six units left from the first allocation.
    Venom GT Hennessey Supercar
    SEALY, TEXAS & SILVERSTONE, ENGLAND, March 29,
    2010 - Hennessey Performance is pleased to introduce the first official images of its Venom GT supercar. Based upon the Lotus Elise, the Venom GT combines a high-tech, lightweight British chassis with a powerful American V8.
    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

Lamborghini Embolado

    Lamborghini Embolado

    lamborghini embolado concept car
    lamborghini embolado
    lamborghini embolado car
    lamborghini embolado car pictures

    Lamborghini Embolado
    Created by Italian design student Luca Serafini, the idea of the Embolado came from the Spanish festival Toro Embolado, meaning ‘bull in balls’, an event where balls of flammable material are attached to the horns of a bull and lit on fire. The bull is then set free in the streets at night. “The choice of the name was the first step towards the creation of this concept,” says Serafini. He’s even created a Superleggera version of the car with similar styling cues to the recently released Gallardo Superleggera. Designing the Embolado stemmed from Serafini’s dream to work at Lamborghini, however he is no stranger to designing Italian supercars, having previously conceptualized a Ferrari Dino. In fact, Serafini is a native of Modena so inspiration for automotive exotica would have come at an early age. The cab forward design approach is also fairly unique to the supercar world, making the Embolado even more of a head-turner than usual
    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

Tuning Hummer

mazda rx7

    mazda rx7
    mazda rx7
    mazda rx7 wallpapers
    mazda rx7 wallpapers
    mazda rx7
    mazda rx7
    mazda rx7 photo
    mazda rx7 photo
    mazda rx7
    mazda rx7
    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection

O novo Aston Martin V8 Vantage Sportshift

    O novo Aston Martin V8 Vantage Sportshift

    O novo Aston Martin V8 Vantage Sportshift
    O novo Aston Martin V8 Vantage SportshiftO novo Aston Martin V8 Vantage Sportshift

    O Astom Martin V8 Sportshift foi eleito em Dubai, nos Emirados Àrabes, pela primeira edição do "Car Middle East Award" como o "veículo do ano".
    Source URL: http://carneeew.blogspot.com/2010/03/
    Visit Car New for Daily Updated Hairstyles Collection
http://www.777seo.com/seo.php?username=wahyudewi&format=ptp

Blog Archive